SCREW OIL PRESS
VG-150ZD II
Screw oil press for expanded production
Plan your next level of processing.
Seed input is not finished oil output. Confirm configuration before ordering.
VG-150ZD II
A Press for Your Process
A larger screw press for projects with an increased processing requirement. The technical parameter table specifies a 300–500 kg/h rapeseed feed rate, 30 kW main motor and 4.7 kW heater. Discuss the preparation and filtration scope for your application.
Larger screw press platform
Heated pressing assembly
Project-specific drive and electrical confirmation
Filtration scope selected separately
Technical Data
Know Your Configuration
Check capacity, electrical supply and dimensions before planning the installation.
| Reference material | Rapeseed |
|---|---|
| Reference seed feed capacity | 300–500 kg/h |
| Main motor | 30 kW, 6-pole |
| Heater reference | 4.7 kW |
| Screw diameter reference | 146 mm |
| Screw speed reference | 42 rpm |
| Press chamber internal diameter reference | 147 mm |
| Overall dimensions | 3000 × 2350 × 1650 mm |
| Reference machine weight | 1550 kg |
| Standard electrical supply | 3-phase 380 V / 50 Hz; confirm before order |
| Hopper & oil tray | Material grade to be confirmed |
These reference values are not guarantees for every seed. The approved technical scope defines the supplied machine.
Machine Details
Inside the Equipment
Press screw assembly
A wider assembly view showing the screw, cage and support relationship.
ALL COMPONENTS ↗
Screw elements
Heat-treated screw press elements presented for a component-level overview.
ALL COMPONENTS ↗
Thrust ball bearing
A thrust ball bearing shown in the service-parts reference group.
ALL COMPONENTS ↗See the Process
Pressing in Action
Supplied process reference, not a model-specific performance test. Confirm the machine and trial conditions with VOLGA.
150-series rapeseed reference
Before You Order
Confirm the Complete Scope
Which oilseeds can I discuss with VOLGA?
Start with rapeseed, peanut, sunflower or sesame. Material preparation and model suitability must be confirmed for your project.
Is the feed rate the finished oil output?
No. Published capacities are reference seed-input rates for rapeseed, not finished oil yields. Output depends on the seed and process conditions.
What should I send for a recommendation?
Share your oilseed, preparation method, target seed input per hour, daily operating hours, installation country and local electrical supply.
What else belongs in the supply scope?
Confirm preparation equipment, filtration, oil collection, local power, wear parts and commissioning separately. Follow the approved manual and use trained personnel; footage is not an operating instruction.
